DescriptionTorque Converter - 3/4" Bore #35 Chain
See below for the 1" Jackshaft version option
This asymmetrical torque converter design has been very popular the past 30 yrs, and has been used on many different brands of 5 - 9 HP small engines, go-karts, and mini bikes.
This torque converter is an asymmetrical inline small engine clutch that will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
Engagement range is approximately 2350 RPM.
Our torque converter fits a 3/4" shaft and comes with a 12 tooth sprocket for a #35 chain. It will work with small engines producing 5.5 HP - 9 HP.
It is compatible on most small engines with horizontal shaft.
Predator 212cc - requires an additional 1/8" x 1-1/8" washer
Honda GX160 GX200 and Clones. Kit may need to be altered to work with some 9HP & GX270 engines.
This unit replaces: Comet 218352A Torq-A-Verter TAV TAV2
Driven unit: Diameter 157mm
Drive clutch bore: 3/4"
Belt: Asymmetrical type
Top width: 19mm(3/4")
Sprocket teeth: 12 teeth
Engagement range: 2350 RPM
Recommended engine: 5.5HP - 9HP engine, 3/4" shaft with flat key
Driver Unit: 1 set
Driven Unit: 1 set
V-Belt: 1 pc
Driven Shaft & Gear: 1 set
Side Retainer Plate: 1 pc
Torque Converter Cover: 1 pc
The torque converter is shown here on one of our wake winches
Torque converters create more initial pull than a centrifugal clutch, good for pulling wakeboarders out of the water!
1 inch TC - This torque converter fits a 1" shaft and comes with a 12 tooth sprocket for a 35 chain. It will work with small engines producing 8 HP - 13 HP